Número de pieza 0N300902

Gasket

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 9.32 and 12.582 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
0n300902
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
011395046

Información de la pieza
Within gasket is another rectangle with 2 sides common to gasket length 5.225 in n/m width 1.867 in nom aperture length 4.765 in nom aperture width 1.407 in nom inner corner rad .12 in nom 6TH bolt slot center is 4.740 in nom from bolt slot center on one side and 3.98 in nom from bolt slot center on other side bolt slot is .187 in wide two sides within gasket not common to outer gasket are .180 in nom wide

NSN
Número de acciones nacionales:
5330-01-139-5046 5330011395046
TXT
Descripción:
Gasket
INC
INC
Código de nombre del artículo:
04522
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.180 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
9.620 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
3.430 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.120 inches
MRC:
None.ADPW
Outside Corner Radius:
0.120 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
2.870 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
9.060 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
5.170 inches
MRC:
None.ADVE
Outside Edge To Bolt Hole Center Distance Along Length:
0.450 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.060 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Silicon top
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular

Similar Gaskets

« Packing and Gasket Materials Catálogo
Comparar ahora»
Claro | Esconder