Número de pieza 03A292-3-9

Machine Screw

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 6.34 and 8.559 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
03a292-3-9
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
100 EA
NIIN:
013302553
NSN
Número de acciones nacionales:
5305-01-330-2553 5305013302553
TXT
Descripción:
Machine Screw
INC
INC
Código de nombre del artículo:
06657
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3A
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.530 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
Between 0.546 inches and 0.593 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Hexagon
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.105 inches and 0.120 inches
MRC:
None.AATB
Width Between Flats:
Between 0.305 inches and 0.314 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.ABQZ
Internal Drive Style:
Cross recess type 1
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.190 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
160000 pounds per square inch
MRC:
The chemical compound or mechanical mixture properties of which the screw is fabricated.CYAU
Screw Material:
Titanium alloy uns R56400
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the screw material.CYAW
Screw Material Specification:
Ams 4928 assn standard single material response or ams 4967 assn standard single material response
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the bearing surface of head from the meanline in profile.CYBH
Bearing Surface Of Head Surface Finish:
63.0 microinches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the shank surface from the meanline in profile.CYBK
Shank Surface Finish:
32.0 microinches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the thread surface from the meanline in profile.CYBL
Thread Surface Finish:
32.0 microinches
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjf

Similar Machine Screws

« Screws Catálogo
Comparar ahora»
Claro | Esconder