Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
14-40043-11
Información de la pieza
Shoulder has two wrenching flats 0.260 in Across flats
NSN
Número de acciones nacionales:
TXT
Descripción:
Headed Shoulder Pin
Código de nombre del artículo:
16563
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Round w/wrench flats
Under Head Length:
Between 1.335 inches and 1.345 inches
First Step Diameter:
0.352 inches
First Step Length:
0.310 inches
Second Step Diameter:
Between 0.2470 inches and 0.2485 inches
Second Step Length:
Between 1.025 inches and 1.035 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
First Hole Diameter:
0.052 inches
Distance From Centerline Of Hole To End Of Pin:
0.220 inches
First End Taper Length:
0.050 inches
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
Between 0.428 inches and 0.448 inches
First End Taper Angle:
30.0 degrees
Pin Head Diameter:
0.750 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Csym
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches shank end
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.080 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 630
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5643 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
