Número de pieza 13015120

Plate Spacer

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 4.3 and 5.805 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
13015120
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
No qup EA
NIIN:
016124688

Información de la pieza
The aperture is located 2.88 inch from the top and 1.75 inch from the width The location of the 3 bolt holes note positioned above are one at 1.75 along width and .88 above center of the aperture The other two are located 1.37 inch below the aperture and 1.06 from each edge along the length All three holes are 0.282 min and 0.312 maximum diameter

NSN
Número de acciones nacionales:
5365-01-612-4688 5365016124688
TXT
Descripción:
Plate Spacer
INC
INC
Código de nombre del artículo:
26979
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.313 inches and 0.343 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.50 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
3.50 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
1.00 inches
MRC:
None.ADPW
Outside Corner Radius:
0.25 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
0.050 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
2.50 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
5.50 inches
MRC:
None.ADVD
Outside Edge To Bolt Hole Center Distance Along Width:
0.50 inches
MRC:
None.ADVE
Outside Edge To Bolt Hole Center Distance Along Length:
0.50 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
7
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2355-01-595-3986
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular w/bolt holes

Similar Plate Spacers

« Bushings, Rings, Shims and Spacers Catálogo
Comparar ahora»
Claro | Esconder